Studio 7 compilation errors

  • Kabron
  • Topic Author
  • New Member
  • New Member
More
9 years 2 weeks ago - 9 years 2 weeks ago #1193 by Kabron
Studio 7 compilation errors was created by Kabron
Compiling the solution I got the following errors in mso.c:
Error 'TC_OVFINTLVL_MED_gc' undeclared (first use in this function) Xprotolab C:\AVR\Studio\Proj\XScopes-Firmware\Source\mso.c 609
Error 'TC_CLKSEL_EVCH5_gc' undeclared (first use in this function) Xprotolab C:\AVR\Studio\Proj\XScopes-Firmware\Source\mso.c 2598
Error 'TC_CLKSEL_EVCH2_gc' undeclared (first use in this function) Xprotolab C:\AVR\Studio\Proj\XScopes-Firmware\Source\mso.c 2607
I see?iox32a4u.h among Dependencies files.
If I change above definitions to their numerical values(e.g.?TC_OVFINTLVL_MED_gc to?(0x02
Last edit: 9 years 2 weeks ago by Kabron.

Please Log in or Create an account to join the conversation.

  • Kabron
  • Topic Author
  • New Member
  • New Member
More
9 years 2 weeks ago #1194 by Kabron
Replied by Kabron on topic Re:Studio 7 compilation errors
Now, while debugging using Studio 7 via AVR Dragon I everytime fell into the trap:
00004001 ff.cf ? ? ? ? ? ? ? ?RJMP PC-0x0000 Relative jump
source code was taken from github
?

Please Log in or Create an account to join the conversation.

  • Kabron
  • Topic Author
  • New Member
  • New Member
More
9 years 2 weeks ago - 9 years 2 weeks ago #1195 by Kabron
Replied by Kabron on topic Re:Studio 7 compilation errors
Also.
Where is bootloader in xprotolab-merged.elf ?
Powering on with Key1 pressed - no reaction.
?
Sorry, OK now
Last edit: 9 years 2 weeks ago by Kabron.

Please Log in or Create an account to join the conversation.

  • Kabron
  • Topic Author
  • New Member
  • New Member
More
9 years 2 weeks ago #1196 by Kabron
Replied by Kabron on topic Re:Studio 7 compilation errors
Loading Xprotolab.hex from \XScopes-Firmware-master\Xprotolab\Debug\ via Flip results nothing. /\r\n/Device stays in bootloader mode.

Please Log in or Create an account to join the conversation.

More
9 years 2 weeks ago #1197 by ganzziani
I've been using Atmel Studio 6.2.
Try using the HEX files from the Xprotolab's page.

Please Log in or Create an account to join the conversation.

Time to create page: 0.197 seconds
Powered by Kunena Forum