Firmware upgrade

More
11 years 3 weeks ago #990 by GNU
Firmware upgrade was created by GNU
Hi,
Is it possible to use the "Firmware Update" feature in the Xscope software? If so, then how?
The button is grayed out and the app keeps saying I need to upgrade my firmware.
I've got a Xminilab Portable (FW 2.28) connected to a Mac running the latest version of OSX.

Please Log in or Create an account to join the conversation.

More
11 years 3 weeks ago #991 by Kenidowa
Replied by Kenidowa on topic Re:Firmware upgrade
I am also interested in this question or do I need to follow the manual section 9.2 FW upgrade using bootloader. If so what are pins 1 and 6 that need to be connected? 9.2.2 activating bootloader third bullet "For devices without buttons, connect pins 1 and 6 of the external port, then connect the USB cable." I have the plain versions no buttons or display so using usb and the software application.

Please Log in or Create an account to join the conversation.

More
11 years 3 weeks ago #993 by ganzziani
Replied by ganzziani on topic Re:Firmware upgrade
The "Firmware Update" is not implemented yet, and when it is, it will not be compatible with current bootloaders. It will be a feature only available to future devices (unless you can program the new bootloader with a dedicated programmer)./\r\n/For now, you will need to follow the procedure in the manual, section 9.2./\r\n/For the Xprotolab Plain (no buttons), you need to connect pins 1 and 6 of the surface mount connector pads, right next to the USB connector. See the picture attached.
?

Please Log in or Create an account to join the conversation.

More
11 years 2 weeks ago #995 by Kenidowa
Replied by Kenidowa on topic Re:Firmware upgrade
ok that helps. I will try when i get a chance. I have downloaded the Atmel FLIP program but need to fix an error with it before I can try./\r\n/Thanks/\r\n/ken

Please Log in or Create an account to join the conversation.

More
11 years 2 weeks ago #997 by Kenidowa
Replied by Kenidowa on topic Re:Firmware upgrade
Has anyone updated FW using the Atmel FLIP app?

Please Log in or Create an account to join the conversation.

More
11 years 1 week ago #998 by ganzziani
Replied by ganzziani on topic Re:Firmware upgrade
I do it all the time. What is the error that you are getting?

Please Log in or Create an account to join the conversation.

Time to create page: 0.205 seconds
Powered by Kunena Forum