Gabotronics

My Kickstarter project was successfully funded!

This project is to design the Xprotolab in an enclosure, and add a rechargeable battery.
I will use a Hammond enclosure, it measures 2.9" x 2.0" x 0.7". For the battery, I'll use a Lipo with at least 600mAh, it is enough capacity to power the Xprotolab for about 12 hours of continuous use.

Comments

jdinsmore

I purchased the Android Oscilloscope Pro app from the Play Store; and after some struggle found an adapter cable to connect my Android tablet to it; I am pleased with the results. The cable I used is: USB OTG CABLE - FEMALE A TO MICRO A (some tablets might use mini instead)

http://www.jayconsystems.com/usb-otg-cable-female-a-to-micro-a-5.html

Saturday 12 October 2013, 10:39

Please login to post comments or replies.