Home Forum XScopes PC Interface trigger level setting vanishes at 20ms.d...
 Gabotronics Forum :: XScopes PC Interface
Welcome Guest   
 Subject :trigger level setting vanishes at 20ms.div.. 2016-09-10 17:16:10 
cems
Joined: 2016-09-06 23:12:59
Posts: 2
Location

The on screen setting cursor for the trigger delay and trigger level vanishes when I set the horizontal rate slower than 10ms/sec.

 

It seems like it not only vanishes but the trigger position becomes random as it no longer has the trigger edge in the same position on every trace.

 

How to I set an edge trigger for ahorizinalt rate slower than 10ms/division

 

I m using an Xprotolab board with the latest download of Xscope running on a Windows 10 machine.

IP Logged
 Subject :Re:trigger level setting vanishes at 20ms.div.. 2016-09-15 19:00:42 
ganzziani
Joined: 2012-04-02 15:42:39
Posts: 463
Location: Sarasota, FL
 

At 20ms/div and slower, the trigger is placed on the left of the screen.
If the trigger is not visible, then you probably have the ROLL mode enabled, in which case, the trigger is not used.

IP Logged
Gabriel Anzziani
 Subject :Re:trigger level setting vanishes at 20ms.div.. 2016-12-31 05:49:45 
MechScientist
Joined: 2014-12-28 00:43:38
Posts: 6
Location
Thanks for posting this. I should have read it a while ago as I didn't realize that you could move the trigger symbol on the screen and that set the level.
IP Logged
Page # 


Powered by ccBoard