Home Forum XMEGA Xprotolab Add Display to XProtolab Plain
 Gabotronics Forum :: XMEGA Xprotolab
Welcome Guest   
 Subject :Add Display to XProtolab Plain.. 2016-11-29 02:51:23 
Joined: 2016-11-29 08:42:13
Posts: 1

Dear Sirs,

same typical Arduino TFT and OLED displays are laying around in my hobby boxes. Therefore my question if it´s possible to add a TFT (Nextion, Adafruit 2.4, 2.8", ... ) or OLED display (i2c, ... to the xprotolab plain board. If so what else has to be done. I assume that firmware etc. has to be modified.


Thanks for your thoughts



IP Logged
Page # 

Powered by ccBoard