Home Forum AVR Xmegalab Driver install Error
 Gabotronics Forum :: AVR Xmegalab
Welcome Guest   
 Subject :Driver install Error.. 2012-07-19 08:27:02 
Olitsch
Joined: 2011-11-24 12:57:22
Posts: 4
Location: Hamburg / Germany

Hi there !

First off all, I realy love the Xprotolab (HW 1.7) and was very exited to see that the USB connection is implemented. I flashed the new Firmware (1.78) but when i try to install the PC-Interface-Driver i get an Error:

"Driversoftware for the device was found but an error occured: Wrong Parameter"

It is not the original error message because i had to translate it.

I use Win 7 Professional 64-bit.

Is there anything i can do to make it work?

 

IP Logged
 Subject :Re:Driver install Error.. 2012-07-19 08:43:03 
ganzziani
Joined: 2012-04-02 15:42:39
Posts: 463
Location: Sarasota, FL
 
Does the "XMEGA Oscilloscope" appear on the windows device manager? You can also try installing in a virtual windows xp.
IP Logged
Gabriel Anzziani
 Subject :Re:Driver install Error.. 2012-07-20 09:48:50 
Olitsch
Joined: 2011-11-24 12:57:22
Posts: 4
Location: Hamburg / Germany

When i plug it in for the first time it is "XMEGA Oscilloscope", then i try to install the driver and get the described error and the device changes to "unknown device".

Tried the windows boot option to allow unsigned drives, but nothing changed.

I am installing Win XP mode and i am gonna try it.

IP Logged
 Subject :Re:Driver install Error.. 2012-07-21 11:46:14 
Olitsch
Joined: 2011-11-24 12:57:22
Posts: 4
Location: Hamburg / Germany

Just tried the Win XP thing and the driver install works, but the Interface Software crashes at startup.

Without the Xprotolab plugged in it starts just fine.

IP Logged
 Subject :Re:Driver install Error.. 2012-07-21 13:34:59 
ganzziani
Joined: 2012-04-02 15:42:39
Posts: 463
Location: Sarasota, FL
 
The software is still under development, I know that it will crash if there is no data available from the Xprotolab, for example, if the device is waiting for the trigger. Is the green LED flashing when you try to start the software? If it still is not working, just wait a few more weeks until I have a more stable release...
IP Logged
Gabriel Anzziani
 Subject :Re:Driver install Error.. 2012-07-21 13:58:39 
ganzziani
Joined: 2012-04-02 15:42:39
Posts: 463
Location: Sarasota, FL
 

I am asking for information on the AVR Freaks forums: WinUSB

How about installing the driver on Win7 as administrator?

IP Logged
Gabriel Anzziani
 Subject :Re:Driver install Error.. 2012-08-09 12:20:59 
Olitsch
Joined: 2011-11-24 12:57:22
Posts: 4
Location: Hamburg / Germany

Its me again :)

I was busy lately, but i updated everything today and voila it works like a charm ( had to run the Software as admin, but thats fine) no win XP mode necessary.

You made my day ;)

Keep up the great work !

 

Thx

IP Logged
 Subject :Re:Driver install Error.. 2012-10-26 13:58:47 
carlos1w
Joined: 2013-01-16 16:25:44
Posts: 6
Location
Hi Gabo. Nice job with the new devices (thank you, I did get the ones updated). Trying to install the usb driver while on Win7 I get "invalid parameter". Any idea?
IP Logged
 Subject :Re:Driver install Error.. 2012-10-26 17:37:05 
ganzziani
Joined: 2012-04-02 15:42:39
Posts: 463
Location: Sarasota, FL
 
Hi!. Try installing as administrator.
IP Logged
Gabriel Anzziani
 Subject :Re:Driver install Error.. 2017-05-17 20:39:05 
mahesh150
Joined: 2017-05-18 01:36:27
Posts: 1
Location: jaipur
When i connect it to interestingly it is "XMEGA Oscilloscope", then i attempt to introduce the driver and get the portrayed blunder and the gadget changes to "obscure gadget".

Attempted the windows boot alternative to permit unsigned drives, yet nothing changed.

I am introducing Win XP mode and i am going to attempt it.
IP Logged
Taxi service in jaipur
Page # 


Powered by ccBoard