Home Forum XMEGA Xminilab Designing for the Xminlab
 Gabotronics Forum :: XMEGA Xminilab
Welcome Guest   
 Subject :Designing for the Xminlab.. 2017-09-13 23:27:16 
g.holmes
Joined: 2017-09-14 04:18:21
Posts: 1
Location

Hi

First question do you have a cad model of the Xminilab showing at least the basic outline position of display to board profile and height, position of headers and switches K1-K4, as I am looking to incorporate this board into a larger unit ?

Also which side of K1-K4 is gound, so I can wire to the other side to remotely control/switch menu ?

Many thanks

Gordon

IP Logged
 Subject :Re:Designing for the Xminlab.. 2017-10-27 06:30:01 
agmihos
Joined: 2017-10-27 03:07:08
Posts: 6
Location
Some dimensions are described in user manual, page 10.
You can find easily K1-K4 ground by a multimeter. Turn switch to "Ω", place one terminal to one of the GNDs on pin header, and search all others by the other terminal of multimeter.
IP Logged
Page # 


Powered by ccBoard