Wall Transformer 6VDC 1AXMEGA Xminilab-B

XMEGA Xminilab
View Full-Size Image

XMEGA Xminilab

book schematics code hex file spreadsheet pc-wave movie picture faq forum
Manual EN
Schematics Code Hex BOM Interface Videos Pictures FAQ Forums

Current stock has a  GREEN display

The Xminilab is a mixed signal oscilloscope with an arbitrary waveform generator in a DIP module. It measures only 3.3 x 1.75 inches, and can be mounted directly on a breadboard. The Xminilab can also be used as a development board for the AVR XMEGA microcontroller.


  • Mixed Signal Oscilloscope: Simultaneous sampling of analog and digital signals.
  • Advanced Trigger: Normal / Single / Auto, with rising or falling edge and adjustable trigger level.
  • Meter Mode: Average, Peak to peak and Frequency readout.
  • XY Mode (Plot Lissajous patterns or see the phase difference between two waveforms).
  • Spectrum Analyzer with different windowing options and selectable vertical log.
  • Horizontal and Vertical Cursors with automatic waveform measurements.
  • Arbitrary Waveform Generator with Sweep on all parameters.
  • Display options: Persistence, Different grid options, and more.

General Specifications:

  • Graphic OLED display 2.42", 128x64 pixels
  • Module size: 3.3" x 1.75"
  • PDI interface.
  • 4 tactile switches
  • USB connectivity: Windows, Linux, MAC, Android

Logic Analyzer specifications:

  • 8 Digital Inputs, 3.3V level.
  • Maximum sampling rate: 2MSPS
  • Frequency counter: 16Mhz
  • Protocol Sniffer: UART, I2C, SPI
  • Internal pull up or pull down.
  • Buffer size: 256

Oscilloscope specifications:

  • 2 Analog Inputs
  • Maximum Sampling rate: 2MSPS
  • Analog Bandwidth: 200kHz
  • Resolution: 8bits
  • Input Impedance: 1M?
  • Buffer size per channel: 256
  • Input Voltage Range: -14V to +20V

AWG specifications:

  • 1 Analog Output
  • Maximum conversion rate: 1MSPS
  • Analog Bandwidth: 44.1kHz
  • Resolution: 8bits
  • Output current > +/- 7mA
  • Buffer size: 256
  • Output Voltage: +/- 2V

Optional Accessories (soldering required):
- PDI Programming Header: Only needed to do firmware development on the device.
- Jumper Wires: Useful for breadboard prototyping, 6" male to male.


This product is currently not available.
Usually ships in:

Price: $59.00
worldwide-orbit We ship worldwide, but you can also buy from a distributor near you.





Customer Reviews:

TORKEL BRAEKHUS  (Thursday, 01 November 2018) Rating: 5
This is a wery good little scope. Skipped the sniffer part on my first one and built it into an aluminium shell with standard bnc
Gheorghe Popa-Radu  (Thursday, 31 October 2013) Rating: 5
I just can say it enough: this oscilloscope ROCKS! The ability to decode I2C, SPI, UART is just unbelievable!
Laurens Weyn  (Friday, 09 March 2012) Rating: 5
I got mine and it's just great! I love how many features this thing has. this is my first oscilloscope, so I found the functions a bit confusing at first, along with the menus. the screen is also great, and I like that I got an amber one. one slight problem I've had is my breadboard does not allow this thing to be plugged in. my breadboard also hates voltage regulators, though, and I got around the problem using female to male wires. this isn't very sturdy, but I am planning to make a case for it anyway. overall, I love it!

Ask a question about this product

You may also be interested in this/these product(s)

XMEGA Xprotolab
XMEGA Xprotolab
Kit to build Xminilab
Kit to build Xminilab
Bluetooth Module
Bluetooth Module

Xminilab Portable
Xminilab Portable




Shopping Cart

Your Cart is currently empty.

Featured Products

XMEGA Xprotolab
XMEGA Xprotolab


Your MultiKit is great!!!! I need a terminal, i need a small oscilloscope, this is ideal for me.
Janos Tolgyesi
Official PayPal Seal